Controller Set-Up Mode - Honeywell DCP 50 Product Manual

4

CONTROLLER SET-UP MODE

In this mode, the parameters which define the operation of the controller are
defined. Controller Set-Up Mode can be entered (whether or not there is a program
currently running) as follows:
NOTES:
1. If the Controller Set-Up Mode lock code has been set to 0, pressing the SET
UP key in Step 2 will give direct access to Controller Set-Up Mode; no entry of
lock code is required.
2. If the upper display initially shows all decimal points
illuminated (see right), one or more configuration
parameters have been altered and, as a
consequence, all ControllerSet Up Mode parameters
have been automatically set to their default
values/settings. To clear this display, simply alter the value/setting of any
Controller Set Up Mode parameter.
4-1