Honeywell DCP 50 Product Manual page 70

Type Input Range
L
0.0 - 205.7°C
L
32.0 - 402.2°F
L
0 - 450°C
L
32 - 841°F
L
0 - 762°C
L
32 - 1403°F
Calibration:
Sensor Break Protection:
Resistance Temperature Detector (RTD) and DC mV:
from front panel:
Input Range
0 - 800°C *
32 - 1471°F
32 - 571°F
-100.9 - 100.0°C
-149.7 - 211.9°F
0 - 300°C
* Default
Type and Connection:
Calibration:
Lead Compensation:
RTD Sensor Current:
Sensor Break Protection:
B-2
Dislayed Code Type
1815
1816
1817
1818
1819 C/W5
1820 C/W5
Complies with BS4937, NBS125 and IEC584.
Break detected within two seconds. Control outputs
set to OFF (0% power); Alarms operate as if the
process variable has gone over-range.
Displayed Code
7220
7221
2229
2230
2231
2251
Three-wire Pt100
Complies with BS1904 and DIN43760.
Automatic scheme.
150 A (approximately)
µ
Break detected within two seconds. Control outputs
set to OFF (0% power). For RTD input, alarms operate
as if the process variable has gone under-range. For
DC (mV) input, alarms operate as if the process
variable has gone over-range.
Input Range
B
211 - 3315°F
B
100 - 1824°C
N
0 - 1399°C
N
32 - 2550°F
0 - 2316°C
32 - 4201°F
Input Range
0.0 - 100.9°C
32.0 - 213.6°F
-200 - 206°C
-328 - 402°F
-100.9 - 537.3°C
-149.7 - 999.1°F
Displayed Code
1934
1938
5371
5324
1541
1542
Ranges selectable
Displayed Code
2295
2296
2297
2298
7222
7223