Honeywell DCP 50 Product Manual page 75

Isolation:
Range Selection Method:
OUTPUT 3
General
Types Available:
Relay
Contact Type:
Rating:
Lifetime:
Isolation:
DC Pulse/TTL
Drive Capability:
Isolation:
DC Analog
Resolution:
Update Rate:
Ranges:
(Changes between V and mA require link jumper movement.)
0 - 10V: 500 minimum
Ω
0 - 5V: 500 minimum
Ω
Isolated from all other inputs and outputs.
Link jumper or DIP switch and front panel
code.
Relay, DC Pulse, DC linear (Recorder Output
only)
Single pole double throw (SPDT).
2A resistive at 120/240V AC.
>500,000 operations at rated voltage/current.
Inherent.
SSR >4.2V DC into 1k
Not isolated from input or other SSR outputs.
Eight bits in 250mS (10 bits in 1 second typical,
>10 bits in >1 second typical).
Every control algorithm execution.
0 - 20mA
4 - 20mA
0 - 10V
0 - 5V
minimum.
Ω
B-7