Table of Contents
Advertisement
3: Configuration
3.1 Configuring the Cable/DSL Gateway Router
Once you've done with the hardware installation, you may start to configure your system. Note that this
high-speed Cable/DSL Router has an internal integrated-circuit chip that programs all the administrative utility.
The utility can be accessed by any PC on the network at http://192.168.1.1 .
Typing http://192.168.1.1 into the PC's browser address windows. (See Figure 3-1) Then, you will receive a
pop-up password request page. (See Figure 3-2) Type "admin" into the Password field and leave the User Name
field empty.
After you access the Utility, you can find detailed instructions and explanations by clicking each page's Help
button. To apply any settings you've altered on any page, click the Apply button, and then click Continue. To
clear any value you've entered on any page, click Cancel.
Figure 3-1 Http://192.168.1.1
Figure 3-2 A Password Request Page
3.2 The Setup Wizard
Figure 3-3 shows the page that you will see once you have accessed to the Utility. The Setup Wizard of the Router
will lead you step by step to configure your Router. Please follow the instructions as the Wizard page request and
change the settings in accordance to the information provided by your ISP.
-8-
Advertisement
Table of Contents
