Parameter Numbers - Honeywell DCP 50 Product Manual

5.4

PARAMETER NUMBERS

The parameter numbering system, in order to conform to the CNOMO standard, splits
parameters into BITS and WORDS and numbers each group independently.
A. Bit Parameters (Controller Status Byte)
There are a maximum of sixteen of these:
No. Parameter
1 Communications Write Status
2 Auto/Manual Control
3 RaPID Tuning Status
4 Pre-Tune Status
5 Alarm 1 Status
6 Alarm 2 Status
7 Reserved
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Reserved
13 Reserved
14 Reserved
15 Reserved
16 Reserved
Read only - 1 = enabled, 0 = disabled
1 = Manual, 0 = Auto
1 = active, 0 = inactive
1 = active, 0 = inactive
Read only - 1 = active, 0 = inactive
Read only - 1 = active, 0 = inactive
Notes
5-7