D-Link DCS-F Series User Manual page 92

Configure Intelligent Analysis
Parameter
The Shortest
Time (Sec)
Output
Channel
Audible
Alarm
Flashlight
Alarm
Alarm
Record
SMTP
FTP Upload
Whitelight
Alarm
Step 3 Set a deployment area
Issue V1.0 (2023-02-10)
Description
The time that a target object spends in loitering
cannot be less than the shortest loitering time.
Setting range: 5-60 seconds.
If you check to set the Output Channel and the
device is connected to an external alarm indicator,
the alarm indicator signals when an alarm is
triggered. Only for some models
Enable, when the alarm happens, it will be play
audio to alarm.
Choose the audible alarm file (set at the
"Configuration > Alarm > Audible Alarm
Output").
Only for some models.
Enable to flashlight alarm when it triggers the alarm,
the flashlight will flash. Only for some models.
Enable the button to enable the alarm record.
Enable the button to enable SMTP sever. For more
details, please refer to chapter 13.5
Enable the button to enable File Transfer Protocol.
For more details please refer to chapter 13.6
When the DayNight mode is chosen Night mode,
and the light is IR LED or NONE, this linkage
action is valid.
Enable to whitelight alarm when it triggers the
alarm, the whitelight will be on. Only for Some
Models.
Camera User Manual
Setting
[How to set]
Input a value in the
area box.
[Default value]
10 s
[How to set]
Click to select an
ID.
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click to enable
Alarm Record.
[Default value]
OFF
[How to set]
Click to enable
SMTP.
[Default value]
OFF
[How to set]
Click to enable FTP
Upload.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
84