Camera User Manual
802.1x
Preparation
802.1x authentication must be configured on the access port, which controls to access network resources
for the connected users' devices on the port.
Procedure
Step 1 Choose Configuration > Network Service > 802.1x.
The 802.1x page is displayed, as shown in Figure 13-1.
Step 2 Click the button on to enable 802.1x.
Step 3 Choose the EAP Method (Extensible Authentication Protocol ) from drop-down list. EAP-MD5
and EAP-TLS can be chosen.
Step 4 Enter the account name.
Step 5 Enter the password and confirm password..
Step 6 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
DDNS
Preparation
Connect the specified camera to the Internet, and obtain the user name and password for logging into
the Dynamic Domain Name System (DDNS) server.
Issue V1.0 (2023-02-10)
13 Configure the Network Service
802.1x page
Configure the Network Service
129