Configure the Alarm Function
Step 2 Click the button on to enable disk alarm.
Step 3 Configure the Alarm Interval parameters.
Step 4 Select Out Channel number (Please refer to the actual product).
Step 5 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
Network Alarm
Procedure
Step 1 Choose Configuration > Alarm > Network Alarm.
The Network Alarm page is displayed, as shown in Figure 9-3.
104
Disk Alarm Page
Network Alarm Page
Camera User Manual
Issue V1.0 (2023-02-10)