Configure the Alarm Function
Click
to upload a new audio.
The type should be WAV, size must be less than 250 Kb, the bit rate should be 128 kbps.
Click "Apply" to save the settings.
----End
Abnormal Sound Detection (Only for Some Models)
Description
The camera has mic or support the line in. On the Audio Abnormal Detection page, you can perform
the following operations:
Enable the Audio Abnormal Detection function.
Set the Audio Abnormal Detection alarming time.
Configure the Audio Abnormal Detection output channel.
When the alarm output function is enabled and the camera detects abnormal audio (sudden rise
or sudden drop) within the schedule time, the camera generates an alarm and triggers linkage
alarm output.
Procedure
Step 1 Choose Configuration >Alarm > Audio Abnormal Detection.
The Audio Abnormal Detection page is displayed, as shown in Figure 9-11.
112
Camera User Manual
Issue V1.0 (2023-02-10)