Configure And Invoke Scans - D-Link DCS-F Series User Manual

Camera User Manual
Step 2 Invoke a track.
Select a track name from the Track list, click
A maximum of six tracks can be configured.

Configure and Invoke Scans

You can configure a starting point and end point to allow the camera to repeatedly rotate from the
starting point to end point.
Step 1 Configure a scan.
1. Click Scan.
The Scan Add page is displayed as shown in Figure 2-4.
Issue V1.0 (2023-02-10)
Track configuration
to invoke the track.
Scan configuration
Parameters of PTZ
15