Table of Contents
Advertisement
Camera User Manual
Parameter
SMTP Server
Port
User Name
Password
Sender E-mail
Address
Recipient_E-
mail_Address 1
Recipient_E-
mail_Address 2
Recipient_E-
mail_Address3
Recipient_E-
mail_Address 4
Recipient_E-
mail_Address 5
Attachment
Image Quality
Transport
Mode
Step 3 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If other information is displayed, set the parameters correctly.
----End
FTP
Description
If the File Transfer Protocol (FTP) button is enabled, the device automatically sends the snapped alarm
JPG images to specified FTP server.
Issue V1.0 (2023-02-10)
Description
Port number of the SMTP
server.
User name of the mailbox for
sending emails.
Password of the mailbox for
sending emails.
Mailbox for sending emails.
(Mandatory) Email address of
recipient 1.
(Optional) Email address of
recipient 2.
(Optional) Email address of
recipient 3.
(Optional) Email address of
recipient 4.
(Optional) Email address of
recipient 5.
A higher-quality image means
more storage space. Set this
parameter based on the site
requirement.
Email encryption mode. Set
this parameter based on the
encryption modes supported
by the SMTP server.
Configure the Network Service
Setting
[Setting method]
Enter a value manually.
[Default value]
25
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
N/A
[Setting method]
Select a value from the drop-down list
box.
[Default value]
No Encrypted
135
Advertisement
Table of Contents
