Table of Contents
Advertisement
Camera User Manual
Step 2 Click the button on to enable Abnormal alarm.
Step 3 Configure the network alarm interval.
Step 4 Select Output Channel number. You can enable alarm record when you install SD card in
advance.
Step 5 Click Apply.
The message "Apply success!" is displayed, the system saves the settings.
----End
Day Night Switch Alarm
Description
At the setting time, enable the day night switch alarm, when it happens day night switched, it will send
alarm signal.
Procedure
Step 1 Choose Configuration > Alarm > Day Night Switch Alarm.
The Day Night Switch Alarm page is displayed, as shown in Figure 9-4.
Step 2 Click the button to enable day night switch alarm.
Step 3 Configure the day night switch alarm schedule.
Issue V1.0 (2023-02-10)
Day Night Switch Alarm
Configure the Alarm Function
105
Advertisement
Table of Contents
