Pppoe - D-Link DCS-F Series User Manual

Camera User Manual
Parameter
Host Name
Accounts
Password
Step 4 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If other information is displayed, set the parameters correctly.
----End

PPPoE

Preparation
Obtain the PPPoE user name and password from the network carrier.
Description
If a PPPoE connection is used, you need to enter the user name and password on the PPPoE page. After
you restart the device, the PPPoE settings take effect and the device obtains a public IP address.
Procedure
Step 1 Choose Configuration > Network Service > PPPoE.
The PPPoE page is displayed, as shown in Figure 13-3.
Issue V1.0 (2023-02-10)
Description
Host name is customized by a user.
User name for logging in to the DDNS
server.
Password for logging in to the DDNS server.
Configure the Network Service
Setting
[Setting method]
Enter a value manually.
[Default value]
Blank
[Setting method]
Enter a value manually.
[Default value]
Blank
[Setting method]
Enter a value manually.
[Default value]
Blank
131