Table of Contents
Advertisement
Configure the Network Service
Procedure
Step 1 Choose Configuration > Network Service > FTP.
The FTP page is displayed, as shown in Figure 13-6.
Step 2 Click the button on to enable FTP.
Step 3 Set the parameters according to Table 13-5.
Parameter
FTP Upload
FTP Address
FTP Port
Account
Password
136
FTP parameters
Description
Indicates whether to enable
the FTP service.
IP address of FTP server.
Port of FTP server.
FTP server account.
FTP server password.
FTP page
Setting
[Setting method]
Click the button on.
[Default value]
OFF
[Setting method]
Enter a value manually.
[Setting method]
N/A
[Default value]
21
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
Camera User Manual
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
