Smart Motion - D-Link DCS-F Series User Manual

Camera User Manual
Parameter
Alarm Record
SMTP
FTP Upload
Whitelight Alarm
Step 3 Set a deployment area
Move the cursor to the drawing interface and click to generate a point, move the cursor to draw a line,
and then click to generate another point. This is how a line is generated. In this way, continue to draw
lines to form any shape, and right-click to finish line drawing.
Step 4 Set deployment time
For more details please refer to 7.1 Step 4..
----End

Smart Motion

Description
The smart motion function refers to that an alarm is generated when target objects (such as person, car,
and both person and car) move at the deployment area.
Procedure
Step 1 Select Intelligent Analysis > Smart Motion, as shown in Figure 7-17.
Issue V1.0 (2023-02-10)
Description
Enable the button to enable the alarm
record.
Enable the button to enable SMTP sever.
The parameters of SMTP can be set at
Configuration > Network Service >
SMTP interface.
Enable the button to enable File Transfer
Protocol.
The parameters of FTP can be set at
Configuration > Network Service > FTP
interface.
When the DayNight mode is chosen Night
mode, and the light is IR LED or NONE,
this linkage action is valid.
Enable to whitelight alarm when it triggers
the alarm, the whitelight will be on. Only
for Some Models.
Configure Intelligent Analysis
Setting
[How to set]
Click to enable Alarm
Record.
[Default value]
OFF
[How to set]
Click to enable SMTP.
[Default value]
OFF
[How to set]
Click to enable FTP
Upload.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
95