Table of Contents
Advertisement
Configure the Network Service
Step 2 Click the button on to enable PPPoE.
Step 3 Set the parameters according to Table 13-2.
Parameter
PPPoE
Accounts
Password
Step 4 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If other information is displayed, set the parameters correctly.
----End
Port Mapping
Description
Port mapping helps establish a mapping relationship between the private network and the external
network. Port mapping allows outside computers to access intranet devices so that the network works
efficiently.
Procedure
Step 1 Choose Configuration > Network Service > Port Mapping.
The Port Mapping page is displayed, as shown in Figure 13-4.
132
PPPoE page
PPPoE parameters
Description
Click to enable PPPoE dialing.
User name of PPPoE provided by the
network carrier.
Password of PPPoE provided by the
network carrier.
Camera User Manual
Setting
[Setting method]
Click the button on.
[Default value]
OFF
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
