Restore Device To Factory Settings; Export / Inport Configuration - D-Link DCS-F Series User Manual

Camera User Manual

Restore Device to Factory Settings

Description
You can restore a device to factory settings including but not limited to the following situations:
The device parameters are set incorrectly, and the device cannot work properly.
A user needs to reset device parameters.
All parameters must be restored to the factory settings.
After you clicking
restored to the factory settings. Use this function carefully.
Procedure
Step 1 Choose Maintenance.
The Device Maintenance page is displayed.
Step 2 Click .
The message "Are you sure to restore?" is displayed.
Step 3 Click OK.
The device is restored to the factory settings.
----End

Export / Inport Configuration

Description
You can export configuration to local hard driver, when you configurate the same model cameras or the
current camera, import the configuration file (config.bin) directly
Procedure
Step 1 Choose Maintenance.
The Device Maintenance page is displayed.
Step 2 Click Download to download the configuration file.
Save the file to local hard driver follow the prompts.
Step 3 Import configuration: choose the file on local hard driver, click Upload to upload file.
Issue V1.0 (2023-02-10)
, all parameters (you can choose whether to reserve the IP address) will be
Maintain the Device
161