Configure the Network Service
get and send to CGI Server. When need to integrate the CGI alarm message, need to resolve the HTTP
Head "User-Agent" to get the data of CGI alarm message.
Procedure
Step 1 Choose Configuration > Network Service > CGI Alarm Service Center.
The CGI Alarm Service Center page is displayed, as shown in Figure 13-9.
Step 2 Click the button on to enable CGI Alarm.
Step 3 Set the parameters according to Table 13-7.
Parameter
CGI Alarm
140
CGI Alarm Service Center page
CGI Alarm Service Center parameters
Description
Indicates whether to enable
the CGI Alarm.
Setting
[Setting method]
Click the button on.
[Default value]
OFF
Camera User Manual
Issue V1.0 (2023-02-10)