Table of Contents
Advertisement
Advanced Intelligent Analysis
Parameter
Audible Alarm
Sensitivity
Alarm Record
SMTP
FTP Upload
Set a deployment area. Move the cursor to the drawing interface and click to generate a point, move
the cursor to draw a line, and then click to generate another point. This is how a line is generated. In this
way, continue to draw lines to form any shape, and right-click to finish line drawing.
NOTE
⚫
A drawn line cannot cross another one, or the line drawing fails.
⚫
Any shape with 32 sides at most can be drawn.
⚫
The quantity of deployment areas is up to 8.
Set deployment time.
Click the armed icon
unarming time.
Method 1：Click left mouse button to select any time point within 0:00-24:00 from Monday to Sunday.
Method 2：Hold down the left mouse button, drag and release mouse to select the deployment time
within 0:00-24:00 from Monday to Sunday.
Deleting deployment time: Click
same as set deployment time.
Issue V1.0 (2023-02-10)
Description
Enable, when happen the alarm, it
will be play audio to alarm.
Choose the sound alarm file (set at
the "Configuration > Alarm >
Audible Alarm Output").
The sensitivity of detecting smoker,
when the value is high, the alarm can
be triggered easily, but the accuracy
will be lower.
When users install SD card to
camera; enable that when happen the
alarm, it will be recording the alarm.
Enable the button to enable SMTP
serve.
Enable the button to enable File
Transfer Protocol.
to set the arming time. Click the Unarmed icon
Setting
[How to set]
Click to enable Audible alarm
[Default value]
OFF
[How to set]
Choose from the drop-down list
[Default value]
5
[How to set]
Click to enable alarm record.
[Default value]
OFF
[How to set]
Click to enable SMTP.
[Default value]
OFF
[How to set]
Click to enable FTP Upload.
[Default value]
OFF
to delete the selected deployment time. The methods are
Camera User Manual
to set the
70
Advertisement
Table of Contents
