Configure The Alarm Function; Alarm Output (Only For Some Models) - D-Link DCS-F Series User Manual

Configure the Alarm Function

Different cameras may have different alarm linkage actions. It depends on the performance of cameras,
please refer to actual products.

Alarm Output (Only for Some Models)

Procedure
Step 1 Choose Configuration > Alarm > Alarm Output.
The Alarm Output page is displayed, as shown in Figure 9-1.
Step 2 Set the parameters according to Table 9-1.
Parameter
Alarm Output
Name
102
9 Configure the Alarm Function
Alarm Output Page
Alarm I/O Parameters
Description
ID of the alarm output channel.
NOTE
The number of alarm output channels depends on
the device model.
Alarm output channel name.
Camera User Manual
Setting
[Setting method]
Select a value from the
drop-down list box.
[Default value]
1
[Value range]
0 to 32 bytes
Issue V1.0 (2023-02-10)