Table of Contents
Advertisement
Configure Protocol Parameters
Multicast Parameters
Description
You can set multicast IP, video port, audio port and source port in multicast parameter page.
Procedure
Step 1 Choose Configuration > Protocol > Multicast Param.
The Multicast Param page is displayed as shown in Figure 15-4. Table 15-4 describes the parameters
on the Multicast Param page.
Parameter
Stream ID
154
Multicast Param page
Parameter description
Description
ID of stream.
Setting
[Setting method]
Select a value from the drop-list box.
[Default value]
1
Camera User Manual
Issue V 1.1(2023-02-10)
Advertisement
Table of Contents
