Description Of The Safety Information On The Scissors Lift Table; Safety Equipment; Protective Bellows - Bosch JLR-100-069 Original Instructions Manual

en-gb | 11 | JLR-100-069
2.2 Description of the Safety
Information on the Scissors Lift
Table
Icon Description
Risk of injuries to hands
Do not place hands or feet here
Do not climb on the platforms
Do not place forklift forks to the left of
this sign
Do not place forklift forks to the right of
this sign
Maximum load capacity, total (1400 kg)
Maximum load capacity for the extendible
platform (800 kg)
Maximum load capacity for the extendible
platform (800 kg)
Maximum Pneumatic Input Pressure
(6 bar, 87.02 psi)
2.3

Safety Equipment

Danger Safety
Equipment
Crushing Hazard for Protective
Hands or Fingers Bellows
Crushing Hazard for Foot Protection
Feet
Falling or Jammed Hydraulic
Platforms Pressure Relief
Valve
Platforms Falling Hydraulic Fail-
Uncontrollably Safe
Platforms Falling Mechanical Lock 2.3.4
Uncontrollably
Use by Unauthorised Ball Valve with
Individuals Padlock
SP04006297 | 06/2021
2.3.1

Protective Bellows

Figure 2: Protective Bellows (5)
Use the scissors lift table only with the protective
bellows (5) in place.
CAUTION
Crushing Hazard in the Scissors Element!
Hands or fingers could be crushed when raising or
lowering the platforms.
Open the protective bellows only when there are
no loads on the platforms.
Open the protective bellows only for the
maintenance work specified in these instructions.
Use the scissors lift table only with the protective
bellows in place.
Only qualified personnel may open the protective
bellows.
Section
Keep hands and feet out of the scissors element.
2.3.1
Close the protective bellows after the maintenance
work has been completed.
2.3.2
2.3.3
2.3.4
2.3.5
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany