Preparing The Pump Assembly; Removing The Scissors Lift Table From The Pallet - Bosch JLR-100-069 Original Instructions Manual

en-gb | 17 | JLR-100-069
3.4

Preparing the Pump Assembly

Figure 13: Pump, Detailed View
9 Pedal (end marked "RELEASE")
10 Pump
11 Pedal (end marked "PUMP")
26 Filler Plug
1. Clean the entire area around the filler plug (26).
2. Unscrew the filler plug (26) on the pump (10) by
half a rotation counter-clockwise.
NOTICE
Danger of Destroying the Pump!
The filler plug is tight on the pump when the
scissors lift table is delivered. The pump could be
destroyed if the platforms are raised or lowered
when the filler plug is still tight.
Tighten the filler plug clockwise only to
transport the scissors lift table over longer
distances to prevent leaks.
Always ensure that the filler plug is unscrewed
by half a rotation counter-clockwise when
raising and lowering the platforms.
SP04006297 | 06/2021
3.5 Removing the Scissors Lift Table
from the Pallet
1. Remove the wooden strips (24) from in front of
the castor wheels (6) (see Figure 8).
2. Push up the brake pedal (12) to release the brakes.
3. Hold the handle (1). Slowly roll the scissors lift
table down the ramp (21) with the help of an
assistant.
WARNING
Danger of the Scissors Lift Table Rolling on
Slopes and Ramps!
The scissors lift table could roll down slopes and
ramps by itself. The scissors lift table is heavy
and therefore has a longer braking distance.
Handling the scissors lift table on slopes and
ramps carelessly could cause serious personal
injuries or severe damage to materials.
Move the scissors lift table on ground that is
as even as possible. Do not move the scissors
lift table over slopes above 3.5°, with the
exception of the ramp included in delivery.
Move the scissors lift table in the direction of
the slope, not across it.
Personnel must remain above the scissors lift
table on slopes.
Use the scissors lift table only with the help of
an assistant to control its movements.
4. Prevent the scissors lift table from rolling by
pressing the brake pedal (12) to activate the
brakes.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany