Brake Covers; Compressed-Air Hose Clamp - Bosch JLR-100-069 Original Instructions Manual

en-gb | 36 | JLR-100-069
6.3

Brake Covers

Figure 39: Brake Covers
1 Handle
3 Platform (static)
4 Platform (extendible)
7 Bottom Frame
42 Brake Covers (2 pieces), Each with 1 Cylinder Head Screw
M5 x 8 8.8
1. Loosen the cylinder head screw on each brake
cover (42) to be removed and set it aside.
Remove the brake covers (42) from the bottom
frame (7) and dispose of them.
2. Attach the new brake covers (42) to the bottom
frame (7). Tighten the cylinder head screws with
a torque of 6.5 Nm.
SP04006297 | 06/2021
6.4

Compressed-Air Hose Clamp

Figure 40: Compressed-Air Hose Clamp
1 Handle
7 Bottom Frame
8 Compressed-Air Hose Clamp
43 Cylinder Head Screws M6 x 10 (2 pieces)
1. Loosen the cylinder head screws (43) on the
compressed-air hose clamp (8) and set them
aside. Remove the compressed-air hose clamp (8)
from the bottom frame (7) and dispose of it.
2. Attach the new compressed-air hose clamp (8) to
the bottom frame (7) and secure it with both
cylinder head screws (43). Tighten the cylinder
head screws (43) with a torque of 10 Nm.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany