Mechanical Lock - Bosch JLR-100-069 Original Instructions Manual

en-gb | 13 | JLR-100-069
2.3.4

Mechanical Lock

Figure 5: Scissors Element
1 Handle
17 Mechanical Lock
18 Locking Block
There is a mechanical lock (17) and a hydraulic fail-
safe on the scissors lift table. Both pieces of safety
equipment prevent the platforms (3) and (4) from
falling uncontrollably.
If the locking block (18) collides against the
mechanical lock (17), the mechanical lock (17) will
prevent the platforms (3) and (4) from falling further.
Perform the following steps to release the platforms
(3) and (4).
WARNING
Risk of Personal Injuries!
If the platforms are not released after the lever has
been pressed, the scissors lift table is severely
damaged and can cause serious personal injuries or
severe damage to materials.
Take the scissors lift table out of operation
immediately and call the service hotline.
SP04006297 | 06/2021
1. Insert the compressed-air hose through the
compressed-air hose clamp (8).
Figure 6: Attaching the Compressed-Air Hose to the
Scissors Lift Table
1 Handle
8 Compressed-Air Hose Clamp
9 Pedal (end marked "RELEASE")
10 Pump
11 Pedal (end marked "PUMP")
12 Brake Pedal
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany