Bosch JLR-100-069 Original Instructions Manual page 38

en-gb | 40 | JLR-100-069
5. With the help of an assistant, lift the static
platform (3) from the scissors lift table and set it
aside.
CAUTION
Danger of Falling Loads!
The static platform weighs approximately 55 kg
and should be carried by more than one person.
Lift and move the static platform only with the
help of an assistant.
6. Remove the six spacers (49) from the top frame
(48) and set them aside.
Figure 47: Scissors Lift Table without Static Platform
4 Platform (extendible)
48 Top Frame
49 Spacers (6 pieces)
7. Pull on and hold the locking pin (29). Use the grip
(28) on the end of the extendible platform (4) to
pull it out until the countersunk head screws (50)
on the stop plates (51) can be loosened.
SP04006297 | 06/2021
Figure 48: Extendible Platform from below
4 Platform (extendible)
27 Spindles (2 pieces)
28 Grip
29 Locking Pin
48 Top Frame
50 Countersunk Head Screws M8 x 20 (2 pieces per
stop plate)
51 Stop Plates (2 pieces)
8. Loosen both countersunk head screws (50) on
each stop plate (51). Remove the stop plates (51)
from the top frame (48). Set the stop plates (51)
and countersunk head screws (50) aside.
9. Pull on and hold the locking pin (29). With the
help of an assistant, pull the extendible platform
(4) towards the grip (28) on the end of the
extendible platform (4), remove it from the
scissors lift table, and set it aside.
CAUTION
Danger of Falling Loads!
The extendible platform weighs approximately
55 kg and should be carried by more than one
person.
Lift and move the extendible platform only
with the help of an assistant.
Figure 49: Extendible Platform from above
4 Platform (extendible)
28 Grip
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany