Attaching The Handle To The Scissors Lift Table; Assembling The Lever - Bosch JLR-100-069 Original Instructions Manual

en-gb | 16 | JLR-100-069
4. Prevent the scissors lift table from rolling by
pressing the brake pedal (12) to activate the
brakes.
WARNING
Rolling Scissors Lift Table!
If the scissors lift table is moved unintentionally,
it could bump or roll into something, which could
cause serious personal injuries or severe
damages to materials.
Always activate the brakes after moving the
scissors lift table.
Do not use the brake pedal to decelerate the
scissors lift table while it is moving.
Figure 10: Activating the Brakes
9 Pedal (end marked "RELEASE")
10 Pump
11 Pedal (end marked "PUMP")
12 Brake Pedal
3.2 Attaching the Handle to the
Scissors Lift Table
1. Push the handle (1) into the bottom frame (7) so
that the holes in the frame (7) align with the
holes in the handle (1).
SP04006297 | 06/2021
Figure 11: Attaching the Handle to the Scissors Lift Table
1 Handle
7 Bottom Frame
8 Compressed-Air Hose Clamp
25 Hexagon Head Screws M8 x 45 8.8 (4 pieces)
2. Tighten all four hexagon head screws (25) in the
holes with a torque of 25 Nm.
3.3

Assembling the Lever

Figure 12: Handle, Detailed View
1 Handle
2 Lever to Release the Mechanical Lock
Place the lever (2) on the handle (1). The magnet will
hold the lever (2) on the handle (1).
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany