Motorola APEX1000 Installation And Operation Manual page 4

B
WARNING: THIS EQUIPMENT OPERATES OVER THE MARKED VOLTAGE AND
FREQUENCY RANGE WITHOUT REQUIRING MANUAL SETTING OF ANY SELECTOR
SWITCHES. DIFFERENT TYPES OF LINE CORD SETS MAY BE USED FOR CONNECTIONS
TO THE MAINS SUPPLY CIRCUIT AND SHOULD COMPLY WITH THE ELECTRICAL CODE
REQUIREMENTS OF THE COUNTRY OF USE. THIS EQUIPMENT REQUIRES A
GROUNDING CONDUCTOR IN THE LINE CORD.
CAUTION: THIS UNIT HAS UP TO TWO (2) 100 – 240 V OR TWO (2) -48 V INPUT
POWER FEEDERS. DISCONNECTING LESS THAN THE MAXIMUM WILL NOT DE-ENERGIZE
THE SYSTEM.
TO REDUCE THE RISK OF INJURY, DISCONNECT THE TWO (2) POWER FEEDERS WHEN
REMOVING POWER TO THE SYSTEM.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
CAUTION: SLIDE/RAIL MOUNTED EQUIPMENT IS NOT TO BE USED AS A SHELF OR A
WORK SPACE.
CAUTION: TO PREVENT ELECTRICAL SHOCK, IF THIS UNIT IS PROVIDED WITH A
POLARIZED PLUG, DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITH
NO PART OF THE BLADES EXPOSED.
CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE
PROVIDED POWER CABLES.
EQUIPMENT MUST BE CONNECTED TO PROTECTIVE EARTH.
THIS DEVICE WHEN POWERED BY DC MUST BE PROTECTED BY A LISTED BRANCH
CIRCUIT PROTECTER RATED MAXIMUM 25 A.
CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH NATIONAL
WIRING CODES AND CONFORM TO LOCAL REGULATIONS.
CAUTION: THE POWER SUPPLY PLUG IS INTENDED TO SERVE AS A POWER
DISCONNECT DEVICE. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this
device is connected. This is to avoid damaging the equipment by local lightning strikes and other
electrical surges.
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual ii
573408-001-a