Mha Encryption Configuration; Figure 8-11 - Mha Configuration - Motorola APEX1000 Installation And Operation Manual

MHA Encryption Configuration

APEX1000 version 2.4.x offers support for Modular Headend Architecture.
The APEX1000 employs MHA mode to support session VOD encryption, where the
encryption tier is unique for each client.
Notes:
•
Because the encryption mode is not included in the session setup parameter, the
APEX1000 must be configured with an encryption mode for dynamic VOD sessions.
•
The APEX1000 must also be configured with default CCI, APS, and CIT settings to
use, in the event that the session VOD encryption parameters for a session setup
(from the ERM) are incomplete.
Item
Encryption Mode Shows the program encryption mode.
CCI Level
SDV — Switched Digital Video Controls • RTSP Controller Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 8-11 — MHA Configuration
MHA Configuration window field definitions
Definition
Values are:
•
Full – The APEX attempts to use Full encryption. The APEX attempts to get
Entitlement Management Messages from an EMM server, configured through the
RDS tab. (Full encryption requires the APEX to have received valid EMMs from an
RDS.)
•
FWK (Fixed Working Key) – The APEX uses Fixed Working Key encryption.
•
FPK (Fixed Program Key) – The APEX uses Fixed Program Key encryption.
Use to configure Copy Control Information levels.
Values are:
•
Not Defined – Set-top box applications can configure the CCI Level.
•
Copy Freely – No restriction on program copying.
•
Copy Once – Program can be copied only once.
•
Copy Never – Program can never be copied.
•
No More Copies – Maximum number of copies has been reached.
B
171