Hardware Events; Figure 12-5 - Hardware Event Log - Motorola APEX1000 Installation And Operation Manual

Hardware Events

The Hardware Event Log window provides a read-only table of hardware errors:
Note: A maximum of 100 errors can be recorded and displayed.
Item
Index
Time Logged
Type
Severity
Event Data
Description
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 12-5 — Hardware Event Log
Hardware Event Log window field definitions
Definition
Index of hardware error table entry.
Shows system up time when the error was logged. A zero demonstrates that the
error occurred at startup.
Indicates the type of hardware event.
Indicates the level of severity of the event.
Applicable to errors that are issued for multiple inputs, outputs, output transport
streams, etc. Also used to indicate the input port, output port, or output transport
stream to which the error applies.
A zero in this area indicates that:
•
The error does not use this parameter
or
•
The APEX1000 cannot determine the port or stream number for the error
or
•
The APEX1000 is not supporting this parameter for the error
Provides a text description of the error.
B
225