Input PSIP
The following table contains a list of messages that are extracted from the APEX1000
input PSIP:
Item
GigE Input
UDP Port
Multicast IP
Source IP
PID
Msg Type
GPS Time
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 12-23 — Input PSIP window
Input PSIP window field definitions
Definition
Shows the number of GigE input for this PSIP message.
Shows the UDP Port for this PSIP message.
Shows the Multicast IP address for this PSIP message.
Indicates the Source ID of EIT tables.
Note: When a message is not specifically related to a program, this value is 0.
Indicates the PID in which this message is contained.
Indicates the PSIP message type:
•
199 – MGT
•
200 – TVCT
•
201 – CVCT
•
203 – EIT
•
202 – RRT
•
205 – ST
The GPS time when the PSIP message was added to the table.
B
259