Table of Contents
Advertisement
Note: Clicking on a row in the left pane will highlight and expand the appropriate node in
the right pane's tree, as shown below:
Item
Type
IF
UDP
Multicast IP
Source IP
PID
Msg. Type
Program No.
Segment
Part
Time
Message
In TS
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Input PSI Table window field definitions
Definition
Indicates whether this message comes from an APEX1000 input or output, or if
the source is unknown.
Indicates the input interface (GigE 1 – 4 or Enet 1 – 2) port ID for which this
message applies.
Displays the Gigabit Ethernet Input UDP Port (User Datagram Protocol).
Range: 0 – 65535
Shows the Gigabit Ethernet Receive Multicast IP Address.
Shows the Gigabit Ethernet Source IP Address.
Shows the input PID Number.
Displays the message type of the message being inserted.
Indicates the program number in the input transport stream. When the
message is related to a program, it indicates the program number.
If the message is not related specifically to a program, this value is zero.
Indicates the segment number of this message, which is useful for PAT
messages.
The 1024 bytes of a message can be divided into parts, which are indexed with
this field.
Displays the time the message was logged.
Displays raw data stream of the message.
Shows the input TS number.
B
258
Advertisement
Table of Contents
