Psip Status; Figure 12-32 - Psip Status - Motorola APEX1000 Installation And Operation Manual

PSIP Status

The following table shows the PSIP status per service. For each service, the service
number, the Output Transport Stream number, its PSIP state and its source id are shown
in the current entry.
Note: Due to the table's reception rates defined by users, and the internal process in the
EQAM, these statistics may take up to two minutes (given that PSIP is enabled until all
the parameters displayed are updated).
Item
Index
Service #
Output TS
Source ID
Service State
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 12-32 — PSIP Status
PSIP Status window field definitions
Definition
Output Program Table Index.
Current Output Service Number.
Current Output Transport Stream of this service.
Current PSIP Program Source Id.
Current program PSIP state.
B
276