Table of Contents
Advertisement
Input Stream Redundancy
Use this window to enable a Secondary GigE input stream configuration for each input.
You can create up to 768 redundant GigE pairs of transport streams (Enet1 and Enet2
streams do not support redundancy). The configuration of Input Stream Redundancy is
only for Manually Routed streams (Program Mapped, Ancillary Mapped, or Stream Pass
Thru).
CAUTION
You cannot configure UDP Port Mapped streams for redundancy. Session Control
services are not configured for redundancy through this screen. SDV services have
redundancy configured by the ERM, and do not require any APEX user configuration.
Manual Routing • Input Stream Redundancy
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 7-6 — Input Stream Redundancy
B
148
Advertisement
Table of Contents
