Table of Contents
Advertisement
Encryption Configuration
Use this window to select and configure the Encryption mode, and to define encryption
settings.
Note: Before changes to the encryption algorithm can take effect, you must reboot the
APEX1000.
Algorithm Mode Settings
The APEX1000 supports the following encryption algorithms:
•
DES (DCII)
•
DES (SCTE-52)
•
DVB-CSA
•
DVB-CSA SimulCrypt
To begin configuring settings, select Configuration > Encryption Configuration.
The Encryption Configuration window displays in the default Algorithm tab:
Configuration • Encryption Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
121
Advertisement
Table of Contents
