Operation
6.9 Communication via PROFINET IO
6.8.4
Further information about communication via PROFIBUS DP
Further information about communication via PROFIBUS DP
For more information about communication via PROFIBUS DP, refer to "Communication via
PROFIBUS DP" in the accompanying "SINAMICS S120 Function Manual".
6.9
Communication via PROFINET IO
6.9.1
Activating online operation: STARTER via PROFINET IO
Description
Online operation with PROFINET IO is implemented using TCP/IP.
Prerequisites
● STARTER Version 4.2 or higher
● Control unit CU320-2 PN or CBE20
STARTER via PROFINET IO (example)
Figure 6-38
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
The PC/PG is referred here to a fixed, free IP address.
2. Settings in STARTER
352
STARTER via PROFINET (example)
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A