Siemens SINAMICS G150 Operating Instructions Manual page 149

Figure 4-32
X1400 Ethernet interface
Table 4- 47
Connector type: RJ45 socket
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Removing the CBE20 from the option slot on the Control Unit
Connector X1400, port 1 - 4
Pin Signal name
1 RX+
2 RX-
3 TX+
4 Reserved, do not use
5 Reserved, do not use
6 TX-
7 Reserved, do not use
8 Reserved, do not use
Screened M_EXT
backshell
Electrical installation
4.10 Other connections
Technical data
Receive data +
Receive data -
Transmit data +
Transmit data -
Screen, permanently connected
149