Siemens SINAMICS G150 Operating Instructions Manual page 245

Basic commissioning: Selecting the motor type and entering the motor data
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
5.5 First commissioning with the AOP30
You can select the motor standard and type
in the dialog screen.
The following is defined for the motor stand-
ard:
0: Line frequency 50 Hz, motor data in kW
1: Line frequency 60 Hz, motor data in hp
The corresponding motor is selected for the
motor type.
Entering the motor data specified on the type
plate.
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
To change a parameter value, navigate to
the required selection field and activate with
<F5>.
The system displays another window in
which you can:
• Enter the value directly, or
• Select the value from a list.
When you have finished entering the motor
data, choose "Continue" below the final pa-
rameter value and activate with <F5>.
Commissioning
245