Sony PCS-6000 Operating Instructions Manual page 76

Adjusting the Camera
If the frame is repeatedly extended to the full screen
If the lamp at the side of the lens lights up
76
Chapter 2 Basic Operation During a Meeting
3
Use the joystick and the ZOOM/TV-CH buttons on the Remote
Commander to place a subject into the frame.
Notes
• Be sure to place the subject so that the portion uniform in brightness
and color is in the frame.
• The camera might not recognize a subject if the portion different
from the subject in brightness and color, such as the backdrop, is
placed together in the frame.
4
Press the joystick on the Remote Commander.
To cancel the automatic target tracking function
Select Auto Track Stop with the joystick on the Remote Commander, then
press the joystick.
The camera does not recognize the subject. Repeat steps 2 to 4 again.
The camera is not capturing the memorized subject correctly.
In this case, perform the pan/tilt operation so that the subject comes into
the screen, or have the subject memorized onto the camera again.
Note
When the frame does not track the subject, repeat steps 2 to 4 until the
frame starts tracking the subject while adjusting the lighting and the
portion of the subject so that the color and brightness of the subject is
optimized.