Table of Contents
Advertisement
Calling a Remote Party
56
Chapter 2 Basic Operation During a Meeting
1
Select Manual Dial with the joystick on the Remote Commander, then
press the joystick, or press the CONNECT/DISCONNECT ( / )
button on the Remote Commander.
The Manual Dial menu appears on the monitor screen.
Manual Dial
A1:
A2:
A3:
A4:
A5:
A6:
Dial
Notes
• The items above differ depending on the types of the boards which
has been installed.
• If a BRI board, a PRI board, a V.35 board, an RS-449 board, or a
LAN software upgrade has not been installed, the Manual Dial menu
cannot be opened.
2
Set up the line interface.
Select Line I/F with the joystick on the Remote Commander, then
press the joystick. Select the desired setting by moving the joystick up
or down, then press the joystick.
BRI: Connects to a TV conferencing system via the BRI interface.
PRI: Connects to a TV conferencing system via the PRI interface.
PRI-S: Connects to a TV conferencing system using H
America), H
(for European countries) of the PRI interface.
12
Telephone: Connects to a phone to have a voice meeting via the
normal ISDN line.
V.35: Connects to a TV conferencing system via the V.35 interface.
LAN: Connects to a TV conferencing system using a LAN.
RS-449: Connects to a TV conferencing system via the RS-449
interface.
3
Enter the telephone number.
When connecting via the ISDN lines
Enter the telephone number of the remote party to have a meeting with
in the boxes.
Line I/F:
BRI
Number of Lines:
6B
Prefix:
Prefix-None
Restrict:
Auto
Save
, H
(for North
0
11
Advertisement
Table of Contents
