Ending A Point To Multipoint Meeting - Sony PCS-6000 Operating Instructions Manual

Ending a Point to Multipoint Meeting

1
Press the CONNECT/DISCONNECT ( / )
button on the Remote Commander.
The following menu appears on the monitor
screen.
Disconnect Phone Book
Manual Dial
Cancel
2
Select Disconnect with the joystick on the Remote
Commander, then press the joystick.
The following menu appears on the monitor
screen.
Disconnect A
Disconnect All
Disconnect B
Disconnect E Disconnect D Disconnect C
Cancel
3
To disconnect a selected terminal
Select the number to be disconnected with the
joystick on the Remote Commander, then press the
joystick.
The selected terminal is disconnected.
To disconnect all the terminals
Select Disconnect All with the joystick on the
Remote Commander, then press the joystick. Or
press the CONNECT/DISCONNECT ( / )
button on the Remote Commander again.
All of the terminals are disconnected.
To cancel the disconnection
Select Cancel with the joystick in step 3, then press the
joystick.
Chapter 3 Meetings With the Multi Points Function
103