Table of Contents
Advertisement
Registering a Remote Party
62
Chapter 2 Basic Operation During a Meeting
4
Set up the line interface.
BRI: Connected to a TV conferencing system using BRI interface.
PRI: Connects to a TV conferencing system via the PRI interface.
PRI-S: Connects to a TV conferencing system using H
America), H
(for European countries) of the PRI interface.
12
Telephone: Connects to a phone to have a voice meeting via the
normal ISDN line.
V.35: Connects to a TV conferencing system via the V.35 interface.
LAN: Connects to a TV conferencing system using a LAN.
RS-449: Connects to a TV conferencing system via the RS-449
interface.
5
When connecting via the ISDN lines
Enter the telephone number and the sub-address for the remote party
(if the remote party set a sub-address) in the A1 and A2 boxes.
If the remote party is using multiple lines, enter the telephone numbers
in the B1/B2 and subsequent boxes.
Enter the asterisk ( ) after the telephone number, then enter the sub-
address. You cannot use the alphabet in a sub-address.
When selecting PRI-S in step 4, only the A1 box is displayed. Enter
the telephone number in the A1 box.
When connecting on a LAN
Enter the IP address (or host name and domain name) of the remote
party.
When connecting with the V.35 interface with RS-366
When using single channel, enter the telephone number in the A1 box.
When using dual channels, enter the telephone numbers in the A1 and
A2 boxes.
Note
When connecting with the V.35 interface without RS-366 or
connecting with the RS-449 interface, the telephone number boxes are
not displayed.
6
Select the line interface icons.
Move the joystick to the left or right to select the icon, then press the
joystick.
, H
(for North
0
11
Advertisement
Table of Contents
