Sony PCS-6000 Operating Instructions Manual page 74

Adjusting the Camera
To recall a preset
74
Chapter 2 Basic Operation During a Meeting
3
Select the preset number which you want to store the setting with the
joystick on the Remote Commander, then press the joystick.
Camera
1
Preset Save
2
Preset Load
3
Adjustments
4
5
Auto Track
6
4
Set up the angle and zoom.
For details on the angle and zoom settings, see "Adjusting the Camera Angle
and Zoom" on page 72.
5
Press the joystick on the Remote Commander.
The setting will be stored under the selected number.
Hint
If you press and hold any of the buttons from 1 through 6 on the
Remote Commander during a communication session, or if you
continue to press the # and any button from 1 to 6, you can store that
number as the preset value.
1
Select Preset Load with the joystick on the Remote Commander, then
press the joystick.
2
Select the number button (1 to 6) with the joystick on the Remote
Commander, then press the joystick.
The camera is automatically adjusted by the preset under the selected
number.
Camera
1
Preset Save
2
Preset Load
3
Adjustments
4
5
Auto Track
6