Table of Contents
Advertisement
Adjusting the Sound
Adjusting the Volume
Muting Local Conversations – Mute Function
Synchronizing Voice and Motion – Lip Synchronization
You can adjust the volume sent from remote parties.
Press the VOLUME/DOC-BRIGHT + button to increase the volume; the
VOLUME/DOC-BRIGHT – button to decrease it.
The volume bar appears on the monitor screen.
After a while, the bar automatically disappears if you do not operate.
Notes
• You have to set the volume of the monitor at first.
• If feedback occurs, decrease the volume.
You can mute local conversations.
If you press the MIC/DOC-DARK button, local conversations will not be
sent to the remote party.
When local conversations are muted, the mute indication
the monitor screen.
To cancel muting
Press the MIC/DOC-DARK button on the Remote Commander again.
The mute indication
disappears from the monitor screen.
MIC
OFF
During the meeting, voice and motion may lose synchronization.
The automatic lip synchronization function built into the system solves this
problem by closely synchronizing audio and video before they are
transmitted to the remote party.
When you use the lip synchronization, set Lip Sync to On in the Audio
Setup menu. When you do not use the lip synchronization, set it to Off.
For details on the Lip Sync setting, see "Audio Setup Menu" on page 39.
Note
The lip synchronization function only works for your own party. To
activate the lip synchronization function at the remote party, you must ask
them to do so.
is displayed on
MIC
OFF
Chapter 2 Basic Operation During a Meeting
69
Advertisement
Table of Contents
