Adjusting the Camera
Adjusting the Camera Angle and Zoom
To adjust the camera angle
To adjust zoom
Adjusting Focus and Brightness
72
Chapter 2 Basic Operation During a Meeting
You can adjust the camera angle and zoom.
Move the joystick on the Remote Commander up, down, to the left, or to
the right to view any areas not currently covered by the camera. (Select
Camera Angle from the launcher menu to open the Camera Angle menu
when the system is not in communication.)
Outside the camera's scope
Press the ZOOM/TV-CH T button on the Remote Commander to zoom in
or the ZOOM/TV-CH W button to zoom out. Adjust zoom to display the
desired picture.
Focus and brightness are automatically adjusted.
We recommend that you do not use the manual adjustments since the
camera automatically adjust itself for the best focus and brightness.
Select Adjustment with the joystick on the Remote Commander in the
Camera menu, then press the joystick. The guidance will appear and you
can adjust the focus and brightness.
Within the camera's scope