Table of Contents
Advertisement
9
Select Next with the joystick on the Remote Commander, then press
the joystick.
The ISDN Setup (SPID) menu appears on the monitor screen. (This is
only for the USA and Canada.)
10
Set up the ISDN Setup (SPID) menu. (This is only for the USA.)
For details on the SPID registration, see "SPID Registration for Customers in
the USA" on page 25.
11
Select Next with the joystick on the Remote Commander, then press
the joystick.
The LAN Setup menu appears on the monitor screen.
LAN Setup Wizard
DHCP Mode:
Auto
Host Name:
PCSXXXXXX
____ . ____ . ____ . ____
IP Address:
____ . ____ . ____ . ____
Network Mask:
____ . ____ . ____ . ____
Gateway Address:
____ . ____ . ____ . ____
DNS Address:
Previous
12
Set up the LAN Setup menu.
For details on the LAN Setup menu, see "LAN Setup Menu" on page 43.
13
Select Next with the joystick on the Remote Commander, then press
the joystick.
The message for verification appears.
14
Select Save with the joystick on the Remote Commander, then press
the joystick.
The setting is saved. Also, set up other menus (pages 32 to 46).
To cancel the setup
Select Cancel with the joystick on the Remote Commander, then press the
joystick. Or press the RETURN button on the Remote Commander.
To page up or down the menu
To page up, select Previous with the joystick on the Remote Commander,
then press the joystick. To page down, select Next with the joystick, then
press the joystick.
Next
Cancel
23
Chapter 1 Preparation
Advertisement
Table of Contents
