Sony PCS-6000 Operating Instructions Manual page 101

Voice Activated mode
Detects the terminal that speaks at the highest level
among the connected terminals, and sends the picture
to all the terminals. The terminal being displayed on
the local monitor is indicated as illustrated below.
A
When the local picture is displayed on all the terminal
monitor, the following indication appears.
B
C
When connecting between five or six terminals, the
indication D or E is appears.
The default broadcast mode when starting a meeting is
according to the setting in the Multipoint Setup menu.
1
Press the FAR/NEAR button on the Remote
Commander.
The Display Control menu appears.
Display Control
Display Control Broadcast Mode
Far A Broadcast
2
Select Split or Voice Activated from Broadcast
Mode with the joystick on the Remote
Commander, then press the joystick.
Each time you select the setting, the mode is
switched between the Split mode and the Voice
Activated mode.
User control mode
You can manually select the picture to be broadcast.
Once you select the picture, both the broadcast modes
are canceled, and the selected picture is displayed on
each screen at full-size.
1
Press the FAR/NEAR button on the Remote
Commander.
The Display Control menu appears.
2
Select Self Broadcast, A Broadcast, B Broadcast, C
Broadcast, D Broadcast, or E Broadcast from
Broadcast Mode with the joystick on the Remote
Commander, then press the joystick.
The selected picture is displayed on each screen at
full-size.
Chapter 3 Meetings With the Multi Points Function
101