Table of Contents
Advertisement
Upgrading the
Software
Follow the procedure below to upgrade the software.
1
Turn on the power.
The top menu appears on the monitor screen.
2
Open the CD-ROM/Hard disk drive cover.
3
Press the EJECT switch.
The CD-ROM tray slides out.
4
Place the CD-ROM for upgrade on the tray, then
press the EJECT switch.
Upgrading starts. After the upgrade is completed,
the system will restart.
5
Press the EJECT switch, then remove the CD-
ROM.
112
Chapter 5 Meetings With Optional Equipment
Connection using a
LAN
You need to upgrade the system using the optional
PCS-UC601 Upgrade Kit. You can connect on a LAN.
Use the UTP (Unshielded Twisted Pair) category 5
cable.
2
SLOT
NUMBER
6
4
7
AUDIO IN
AUDIO OUT
VIDEO
IN
AUX
AUX
MON L
MON R
AUX2
AUX1
1
2
3
VIDEO
OUT
RGB OUT
OBJECT
MON2
AUX
MON1
MONITOR
BRI
A
B
C
D
to 10/100BASE-T
UTP cable
Hub
Advertisement
Table of Contents
