System Reactions To Sinumerik Alarms - Siemens Sinamics S120 Diagnostic Manual

System reactions
8.1

System reactions to SINUMERIK alarms

Identifier COMPBLOCKWITHREORG
Effects Block preparation has detected an error, which can be rectified by modifying the program.
Reorganization is performed after a program modification.
• Correction block with reorganization.
Identifier COMPENSATIONBLOCK
Effects Block preparation has detected an error, which can be rectified by modifying the program.
• Correction block.
Identifier FOLLOWUP
Effects Follow-up of axes.
• NC switches to follow-up mode.
Identifier INTERPRETERSTOP
Effects Program execution is aborted after all the prepared blocks (IPO buffer) have been processed.
• Interpreter stop.
Identifier LOCALREACTION
Effects • Local alarm reaction.
Identifier NOALARMREACTION
Effects • No alarm reaction.
Identifier NOREADY | NCKREACTIONVIEW
Effects NCK ready off: Active fast braking (i.e. with maximum braking current) of all drives, the controller
enable for all NC axes is deleted, the NC ready relay drops out.
• NC not ready.
Alarms
Diagnostics Manual 07/2010, 6FC5398-8BP40-0BA0
8
931