Position Of Corner Not Clearly Definable, Check Parameter_Setv [0...7]; Block %2: _Protval[0] -_Protval[5] Do Not Have Any Entries; Product Of Column Width And Number Of Columns Exceeds 200 Characters; Block %2: Selected Meas.variant Requires Spos-Capable Spindle - Siemens Sinamics S120 Diagnostic Manual
Hide thumbs
Also See for Sinamics S120:
- Function manual (1094 pages) ,
- Manual (848 pages) ,
- Equipment manual (570 pages)
Table of Contents
Advertisement
NCK alarms
61368
[Channel %1: ] Block %2: Straights through parameter _SETV[0...3] or _SETV[4...7]do
not intersect
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE961.
Remedy:
Specify different positions for the relevant points of _SETV[0...7] .
61369
[Channel %1: ] Block %2: Position of corner not clearly definable, check parameter
_SETV[0...7]
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE961.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Define P1 and P2 or P3 and P4 in a way that the intersection of the straights determined by these points is outside the
sections formed by P1 and P2 or P3 and P4.
Program
Clear alarm with the RESET key. Restart part program
Continuation:
61370
[Channel %1: ] Block %2: _PROTVAL[0] -_PROTVAL[5] do not have any entries
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE105.
Remedy:
Enter values in _PROTVAL[0...5].
61371
[Channel %1: ] Block %2: Product of column width and number of columns exceeds
200 characters per line
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE105.
Remedy:
Reduce the column width (_PROTFORM[4]) or number of columns (_PROTVAL[2...5]).
61372
[Channel %1: ] Block %2: selected meas.variant requires SPOS-capable spindle
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Alarm can be triggered by following measuring cycles: all measuring cycles.
Remedy:
Change measuring variant or check machine equipment.
444
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms
Hide quick links:
Advertisement
Table of Contents
